Instructions

Model No.
Date
QU-TK-F3x
2019/1/10
1.03
Communication Protocol
QUIO
Ver.
Page
QU-TK-F3 Series
21 / 52
Stj =32H Third SAM card connector (Optional)
Stj =33H Fourth SAM card connector (Optional)
Stj =34H Fifth SAM card connector (Optional)
An error e1,e0=“60” is returned when a power failure is detected.
9
.7.4 T=0 SAM Card APDU Communication
HOST Command
“
C” 52H 33H
C-APDU
Positive response
“
P” 52H 33H
st0
st1
e0
st2
R-APDU
Negative response
“
N” 52H 33H
e1
This exchanges data between SAM by protocol T=0
If IC Card power error, return e1, e0= “60”
If protocol type of IC card is not T=0, error code “62”is sent.
If ICC does not respond within Working Wait Time, QU-TK-F31 deactivates an IC card and error
code “63” is sent.
If any other protocol error occurs, QU-TK-F31 deactivates an IC card and error code “64” is sent.
If HOST tries to communicate before IC card activation, error code “65” is sent.
Note: If you want to more about T=0 APDU format. Please refer to ISO/IEC7816-3 and COS
command
9.7.5 T=1 SAM Card APDU Communication
HOST Command
“
C” 52H 34H
C-APDU
Positive response
“
P” 52H 34H
st0
st1
e0
st2
R-APDU
Negative response
“
N” 52H 44H
e1
This exchange data between SAM by protocol T=1
If IC Card power error, return e1, e0 = “60”
If protocol type of IC card is not T=0, error code “62”is sent.
If ICC does not respond within Working Wait Time, QU-TK-F31 deactivates an IC card and error code
QUIO
https://www.quio-rfid.de Email: [e-mail]