Instructions

Model No.
Date
QU-TK-F3x
2019/1/10
1.03
Communication Protocol
QUIO
Ver.
Page
QU-TK-F3 Series
17 / 52
“
C” 51H 32H
Positive response
“
P” 51H 32H
st0
e1
st1
e0
st2
Sti
Negative response
“
N” 51H 32H
Machine tells the status of IC card with sti status:
sti =30H Card is not activated
=
31H Card is activated, current CPU Card working frequency is 3.57 MHZ
32H Card is activated, current CPU Card working frequency is 7.16 MHZ
=
If IC Card power error, Error Code: e1, e0= “60”
9
.6.4 T=0 CPU Card APDU Transmission
HOST Command
“
C” 51H 33H
C-APDU
Positive response
“
P” 51H 33H
st0
st1
st2
R-APDU
Negative response
“
N” 51H 33H
e1
e0
This exchanges data between T=0 card and machine
C-APDU from HOST ranges from 4 bytes to 261 bytes
CLA INS
R-APDU to HOST ranges from 2 bytes to 258 bytes
Data1 ….. Data(n)
P1
P2 LC
Data1
……
Sw1
Le
Sw0
Error code “60” is returned on power failure.
If protocol type of IC card is not T=0, error code “62” returns.
If ICC won’t respond within valid Wait Time, machine deactivates the card and returns error
code “63”.
If protocol error occurs, machine deactivate IC card firstly and returns error code “64”.
If HOST communicates before IC card activation, error code “65” returns.
Note: Refer to ISO/IEC7816-3 for more details of T=0 APDU and get C-APDU information from
the Card COS manual.
QUIO
https://www.quio-rfid.de Email: [e-mail]