Instructions

Model No.
Date
QU-TK-F3x
2019/1/10
1.03
Communication Protocol
QUIO
Ver.
Page
QU-TK-F3 Series
14 / 52
9.3 Card Movement
HOST Command
“
C” 32H Pm
Positive response
“
P” 32H Pm
st0
e1
st1
e0
st2
Negative response
“
N” 32H Pm
Pm=30H Move and hold card at gate position;
Pm=31H Move card to contact IC position;
Pm=32H Move card to RF Antenna Position;
Pm=33H Capture Card to Error Card Bin (Recycle Box)
Pm=39H Eject Card out of Machine
Notes:
1
2
.
.
If card cannot be moved to target position, dispenser will return Card Jam Error;
If error card bin is full, error card bin error will be returned when recycling card.
9
.4 Front Insertion Setting
HOST Command
“
C” 33H Pm
Positive response
“
P” 33H Pm
st0
e1
st1
e0
st2
Negative response
“
N” 33H Pm
After card insertion allowed, dispenser will withdraw and move card to RF operation position when a
card is detected at the gate. Card Insertion operation can be confirmed by “Inquiring Status” Command.
Pm=30H Allow Card Insertion
Pm=31H Forbid Card Insertion
Note: Machine will reset to default forbidden mode after reset/initialization.
QUIO
https://www.quio-rfid.de Email: [e-mail]