Instructions

2.3 Data Bit & Parity Check & Stop Bit
Note: some products only allows default configuration (None Parity/8 Data Bits/1 Stop Bit), configuration command: 0607032;
If products do not support multiple configurations, scanning the bar code of non-default configuration would error beep.
None Parity /8 Data Bits/1 Stop Bit (Default)
None Parity /7 Data Bits/1 Stop Bit
Even Parity /8 Data Bits/1 Stop Bit
Even Parity /7 Data Bits/2 Stop Bits
Odd Parity/7 Data Bits/1 Stop Bit
None Parity /7 Data Bits/2 Stop Bits
Even Parity /7 Data Bits/1 Stop Bit
Odd Parity/8 Data Bits/1 Stop Bit
Odd Parity/7 Data Bits/2 Stop Bit
6