Information

Enter Setup

EAN-13 Beginning with 977 Add-On Code Required

This setting programs the engine to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with “977”. The

following settings can be programmed:

RequireAdd-On Code:All EAN-13 barcodes that begin with “977” must have a 2-digit or 5-digit add-on code. The EAN-13

barcodewith the add-oncode is then transmitted.Ifthe required add-oncodeisnotfound,theEAN-13barcodeisdiscarded.

Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan Do Not

RequireAdd-OnCode.EAN-13barcodesarehandled,dependingonyourselectionforthe “Add-OnCodeRequired” feature.

** Do Not Require Add-On Code

Require Add-On Code

EAN-13 Beginning with 978 Add-On Code Required

This setting programs the engine to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with “978”. The