Information

Enter Setup
EAN-13 Beginning with 290 Add-On Code Required
This setting programs the engine to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with “290”. The
following settings can be programmed:
RequireAdd-On Code:All EAN-13 barcodes that begin with “290” must have a 2-digit or 5-digit add-oncode.The EAN-13
barcodewith the add-oncode is then transmitted.Ifthe required add-oncodeisnotfound,theEAN-13barcodeisdiscarded.
Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan Do Not
RequireAdd-OnCode.EAN-13barcodesarehandled,dependingonyourselectionforthe “Add-OnCodeRequired” feature.
** Do Not Require Add-On Code
Require Add-On Code
EAN-13 Beginning with 378/379 Add-On Code Required
This setting programs the engine to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with a “378” or
“379”. The following settings can be programmed:
Require Add-On Code: All EAN-13 barcodes that begin with a “378” or “379” must have a 2-digit or 5-digit add-on code. The
EAN-13 barcode with the add-on code is then transmitted. If the required add-on code is not found, the EAN-13 barcode is
discarded.
Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan Do Not
RequireAdd-OnCode.EAN-13barcodesarehandled,dependingonyourselectionforthe “Add-OnCodeRequired” feature.
** Do Not Require Add-On Code
Require Add-On Code
85
94