Information

Enter Setup
Acquire Scanned Data
After a barcode is decoded, the engine sends an input report as below:
Bit
Byte
0
7 6 5 4 3 2 1 0
Report ID = 0x02
Barcode Length
1
2-57
58-61
62
Decoded Data (1-56)
Reserved
Symbology Identifier or N/C: 0x00
Decoded data
continued
63
- - - - - - -
Send Command to the Engine
This output report is used to send commands to the engine. All programming commands can be used.
Bit
Byte
0
7 6 5 4 3 2 1 0
Report ID = 0x04
Length of command
Command (1-62)
1
2-63
** Exit Setup
79