Information

Enter Setup
Operating Modes
Auto Sleep
Auto Sleep allows the engine to automatically enter the sleep mode if no operation or communication is performed for a time period
(user programmable). Sending trigger signal can awake the engine.
** Disable Auto Sleep
Enable Auto Sleep
The following parameter sets how long the engine remains idle (no operation or communication occurs) before it is put into sleep
mode. It is programmable in 1s increments from 1s to 36000s. The default setting is 15s.
Time Period from Idle to Sleep
Set the time period from idle to sleep to 1,000s:
1. Scan the Enter Setup barcode.
2. Scan the Time Period from Idle to Sleep barcode.
3. Scan the numeric barcodes “1”, “0”, “0” and “0” from the “Digit Barcodes” section inAppendix.
4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Exit Setup barcode.
** Exit Setup
46