Information

Enter Setup

Sensitivity (Sense Mode)

Sensitivity specifies the degree of acuteness of the engine’s response to changes in images captured. There are 20 levels to

choose from. The smaller the value, the higher the sensitivity and the lower requirement in image change to trigger the engine.

You can select an appropriate degree of sensitivity that fits the application environment. This feature is only applicable to the

Sense mode.

Low Sensitivity

Medium Sensitivity

High Sensitivity

Enhanced Sensitivity

Custom Sensitivity (Level 1-20)

Set the sensitivity to Level 10:

1. Scan the Enter Setup barcode.

2. Scan the Custom Sensitivity barcode.

3. Scan the numeric barcodes “1” and “0” from the “Digit Barcodes” section in Appendix.

4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.

5. Scan the Exit Setup barcode.

** Exit Setup