Information

Enter Setup
Scan Mode
Level Mode: A trigger pull activates a decode session. The decode session continues until a barcode is decoded or you release
the trigger.
Sense Mode: The engine activates a decode session every time it detects a barcode presented to it. The decode session
continues until a barcode is decoded or the decode session timeout expires. Reread Timeout can avoid undesired rereading of
same barcode in a given period of time. Sensitivity can change the Sense Mode’s sensibility to changes in images captured.
Image Stabilization Timeout gives the engine time to adapt to ambient environment after it decodes a barcode and “looks”
for another.
Continuous Mode: The engine automatically starts one decode session after another. To suspend/resume barcode reading,
simply press the trigger. Reread Timeout can avoid undesired rereading of same barcode in a given period of time. Note that
when switching to this mode by scanning the Continuous Mode barcode, the engine will stop barcode reading for 3 seconds
before starting scanning continuously.
Batch Mode: A trigger pull activates a round of multiple decode sessions. This round of multiple scans continues until you
release the trigger. Rereading the same barcode is not allowed in the same round.
Level Mode
** Sense Mode
Continuous Mode
Batch Mode
Decode Session Timeout
This parameter sets the maximum time decode session continues during a scan attempt. It is programmable in 1ms
increments from 1ms to 3,600,000ms. When it is set to 0, the timeout is infinite. The default setting is 3,000ms.
** Exit Setup
27