Information

Enter Setup

Good Read LED Duration

This parameter sets the amount of time that the Good Read LED to remain on following a good read. It is programmable in 1ms

increments from 1ms to 2,500ms.

** Short (20ms)

Medium (120ms)

Long (220ms)

Prolonged (320ms)

Custom (1 - 2,500ms）

Set the Good Read LED duration to 800ms:

1. Scan the Enter Setup barcode.

2. Scan the Custom barcode.

3. Scan the numeric barcodes “8”, “0” and “0” from the “Digit Barcodes” section inAppendix.

4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.

5. Scan the Exit Setup barcode.

** Exit Setup