Information

Enter Setup
Example: Program a Format_0 data format using formattercommand type 6, Code 128 containing10 characters applicable, send
all characters followed by “A”.
1. Scan the Enter Setup barcode
2. Scan the Add Data Format barcode
3. Scan the 0 barcode
Enter the Setup mode
Add a data format
Select Format_0 as the label
Select formatter command type 6
All interface types applicable
Only Code 128 applicable
4. Scan the 6 barcode
5. Scan the 9 barcode three times
6. Scan the barcodes 002
7. Scan the barcodes 0010 Only a length of 10 characters applicable
Send all characters followed by “A” (HEX: 41)
Save the data format
8. Scan the alphanumeric barcodes F141
9. Scan the Save barcode
To streamline the programming process, you may as well generate a batch barcode by inputting the command (e.g.
@DFMADD069990020010F141;) used to create a data format. See the “Use Batch Barcode” section in Chapter 9 to learn how
to put a batch barcode into use.
When creating multiple data formats sharing a label, the formats are separated from each other by a vertical bar (|) in the
batch command, e.g. @DFMADD069990029999F141|069990039999F142|169990049999F143;.
** Exit Setup
175