Information

Enter Setup
Set Length Range for Micro QR
The engine can be configured to only decode Micro QR barcodes with lengths that fall between (inclusive)the minimum and
maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 1)
Set the Maximum Length (Default: 35)
Minimum length is not allowed to be greater than maximum length. If you only want to read Micro QR
barcodes with a specific length, set both minimum and maximum lengths to be that desired length.
Set the engine to decode Micro QR Code barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode “8” from the “Digit Barcodes” section in Appendix.
4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcodes “1” and “2” from the “Digit Barcodes” section inAppendix.
7. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.
8. Scan the Exit Setup barcode.
** Exit Setup
167