Information

Enter Setup
Use of Programming Command
Besides the barcode programming method, the engine can also be configured by serial commands (HEX) sent from the host
device. All commands must be entered in uppercase letters.
Query Commands
For query commands, the entry in the Data field in the syntax above is one of the following characters means:
* (HEX: 2A)
& (HEX: 26)
^ (HEX: 5E)
What is the engine’s current value for the setting(s).
What is the factory default value for the setting(s).
What is the range of possible values for the setting(s).
** Exit Setup
16