Information

Enter Setup
Check Character Verification
Check characters are optional for Plessey and can be added as the last two characters, which are calculated values used to
verify the integrity of the data.
Disable: The engine transmits Plessey barcodes as is.
Do Not Transmit Check Character After Verification: The engine checks the integrity of all Plessey barcodes to verify that
the data complies with the check character algorithm. Barcodes passing the checks will be transmitted except the last two
digits, whereas those failing them will not be transmitted.
Transmit Check Character After Verification: The engine checks the integrity of all Plessey barcodes to verify that the data
complies with the check character algorithm. Barcodes passing the checks will be transmitted, whereas those failing them will
not be transmitted.
** Disable
Do Not Transmit Check Character After Verification
Transmit Check Character After Verification
If the Do Not Transmit Check Character After Verification option is enabled, Plessey barcodes with a
length that is less than the configured minimum length after having the check characters excluded will not be
decoded. (For example, when the Do Not Transmit Check Character After Verification option is enabled
and the minimum length is set to 4, Plessey barcodes with a total length of 4 characters including the check
characters cannot be read.)
** Exit Setup
149