Information

Enter Setup
Check Character Verification
A check character is optional for Industrial 25 and can be added as the last character. It is a calculated value used to verify the
integrity of the data.
Disable: The engine transmits Industrial 25 barcodes as is.
Do Not TransmitCheck CharacterAfter Verification: The engine checks the integrity of all Industrial 25 barcodes to verify that
the data complies with the check character algorithm. Barcodes passing the check will be transmitted except the last digit,
whereas those failing it will not be transmitted.
Transmit Check Character After Verification: The engine checks the integrity of all Industrial 25 barcodes to verify that the
data complies with the check character algorithm. Barcodes passing the check will be transmitted, whereas those failing it will
not be transmitted.
** Disable
Do Not Transmit Check Character After Verification
Transmit Check Character After Verification
If the Do Not Transmit Check Character After Verification option is enabled, Industrial 25 barcodes with
a length that is less than the configured minimum length after having the check character excluded will not
be decoded. (For example, when the Do Not Transmit Check Character After Verification option is
enabled and the minimum length is set to 4, Industrial 25 barcodes with a total length of 4 characters
including the check character cannot be read.)
** Exit Setup
143