Information

Enter Setup
Check Character Verification
Check characters are optional for Code 93 and can be added as the last two characters, which are calculated values used to
verify the integrity of the data.
Disable: The engine transmits Code 93 barcodes as is.
Do Not Transmit Check Character After Verification: The engine checks the integrity of all Code 93 barcodes to verify that
the data complies with the check character algorithm. Barcodes passing the checks will be transmitted except the last two
digits, whereas those failing them will not be transmitted.
Transmit Check Character After Verification: The engine checks the integrity of all Code 93 barcodes to verify that the data
complies with the check character algorithm. Barcodes passing the checks will be transmitted, whereas those failing them will
not be transmitted.
Disable
** Do Not Transmit Check Character After Verification
Transmit Check Character After Verification
If the Do Not Transmit Check Character After Verification option is enabled, Code 93 barcodes with a
length that is less than the configured minimum length after having the two check characters excluded will
not be decoded. (For example, when the Do Not Transmit Check Character After Verification option is
enabled and the minimum length is set to 4, Code 93 barcodes with a total length of 4 characters including the
two check characters cannot be read.)
** Exit Setup
131