Information

Enter Setup
Check Character Verification
A check character is optional for Codabar and can be added as the last character. It is a calculated value used to verify the
integrity of the data.
Disable: The engine transmits Codabar barcodes as is.
Do Not Transmit Check Character After Verification: The engine checks the integrity of all Codabar barcodes to verify that
the data complies with the check character algorithm. Barcodes passing the check will be transmitted except the last digit,
whereas those failing it will not be transmitted.
Transmit Check Character After Verification: The engine checks the integrity of all Codabar barcodes to verify that the data
complies with the check character algorithm. Barcodes passing the check will be transmitted, whereas those failing it will not
be transmitted.
** Disable
Do Not Transmit Check Character After Verification
Transmit Check Character After Verification
If the Do Not Transmit Check Character After Verification option is enabled, Codabar barcodes with a
length that is less than the configured minimum length after having the check character excluded will not be
decoded. (For example, when the Do Not Transmit Check Character After Verification option is enabled
and the minimum length is set to 4, Codabar barcodes with a total length of 4 characters including the check
character cannot be read.)
** Exit Setup
127