Instructions

Lock Output Load
Alarm Output Load
management card
2A
2A
2pcs
1
0 Packing List
Name
Access Control
Model/Spec
QU-M2
Quantity
1
1
1
Infared Remote Control
Manager Add Card
Manager Delete Card
Manual
1
1
2
1
QU-M2
Φ3.5*27mm
Star
Self tapping screws
Screw driver
NOTE：Advanced Application
1
two units for single door
Install one at indoor and the other at outdoor，indoor one as controller ，outdoor one as reader
The difference between two units interlocked for single door and standalone for single is below:
.1 Add users on both unit，both indoor user data and outdoor data can be shared，users can be up to 20000.
.2 The setting of the two device must be the same, when admin pin setting is different，outdoor unit can’t open the door with saved users data.
Two units interlocked for two doors
1
1
2
Install two controllers for two doors，control two locks separately ，set interlocked for two units ，open door contact . The other door is locked
when door is open. The other door can be open after close the door. The device can’t control another electric lock, data can’t share between different
units. This function mainly apply for bank, prison etc.
3
Anti-passback for Single door
Install a common reader outdoor（or use this device without any card No. for reader）. Install this device outdoor and set it as anti-passback host
mode. In this case, the two units consist of an anti-passback system for single door, mainly apply to controlling enter and exit for single door. Details
operation is as below：
3
3
.1 Set necessary functions and add user card on the host device.
.2 Users can only present the card on the external reader to enter, and then present the card on the host device to exit, then, present
card on the
external reader to enter, do it like this, enter legally, and then exit legally. Users cant enter or exit at continuous 2 times.
4
Anti-passback for two doors
Install one device on Door 1under anti-passback subsidiary mode,Install one device on Door 2 under anti-passback host mode, in this case, the two
units consist of anti-passback for two doors，mainly apply for one-way in and out for double doors like parking. Functions as follows：
4
4
.1 Set necessary functions and add user card on the host device.
.2 Users can only present the card on the subsidiary device to enter, and then present the card on the host device to exit, then, present card on
subsidiary device to enter, do it like this, enter legally, and then exit legally. Users cant enter or exit at continuous 2 times.