Instructions

3
Factory Reset and Set management card
Connect the two pink wires，then power on. After the sound“didi”, Factory reset is finished. When indication LED turns green，it means you
can set two admin cards now，read the first card as admin add card，the second card as admin delete card，then LED turns red flash，after this, this
device can work ,resetting to factory default.
Note：Reset factory default wont delete user cards, If you present the same card when second read, the device will sound error reminding
“
dididi”, then you can continue present another card. If no operations within 10seconds, the device will enter working mode automatically ,
parameter reset to factory default.
Admin setting on keypad
4