Instructions

_______________________________________________________________________________
https://quio-rfid.de/
2.format parameter setting
【output format selection】USB Virtual keyboard、USB virtual serial port、HTTP、MQTT、
RS232、WG26、WG34、RS485、access control system output( not enabled)、TCP、UDP functions
【card number output format】6H、8H、6H10D、8H10D、2H3D+4H5D option，this card
number format setting is invalid for QR Code
【HID format parameter】 data output if send carriage return、If send line feed， this
parameter setting is invalid for USB virtual serials port, carriage return only valid for USB virtual
keyboard, linefeed only valid for RS232
【parameter】can adjust correspond parameter as you need, this parameter setting is invalid
for USB virtual serial port, only valid for RS485, RS232
【QR code serial port output format】DEC、HEX、DEC Reverse、Hex Reverse、ASCII
option，（ this parameter only valid for RS485,RS232“RS485、RS232”，Hex、Hex Reverse output
format is Hex card number, total bit is odd, output is ASCII，Even number, output is HEX card
number）
3.external parameter
【rest setting】0 for not reset，12hours interval、24 hours interval；
【working mode】common mode, single mode, interval mode，
Common mode：can reading QR code constantly；
single mode：the same QR code can not reading constantly；
interval mode：reading the same QR code need waiting 15 seconds