Instructions

<ETX> ： 03（HEX），order frame over
<BCC> ： <STX>@□@□@ <ETX>，check code
3
.5.3. Operation order
The main frame sends the following orders to the dispenser and operates the relevant
orders:
orders
ASCII
DC
Description
Dispense the card
The machine is ready and
issue card after receiving the
signal
capture
CP
When the card is at the
position of mouth, this order
is to be operated
Request flag
reset
RF
st
Turn back to the real-time
information of the machine
Operate reset order
3
.5.4. Examples of the order
The following codes are in hex:
Order of issue: 0x02, 0x44, 0x43, 0x03, 0x06
Order of capture: 0x02, 0x43, 0x50, 0x03, 0x12
Order of request flag: 0x02, 0x52, 0x46, 0x03, 0x15
Order of reset: 0x02, 0x53, 0x54, 0x03, 0x06
When one frame of order is sent, the machine will back to ACK (0x06) or NAK (0x15). If ACK
(0x06) is received, the main frame send ENQ (0x05), the card dispenser then operate the order
received.
3
.5.5-card issuers response command
3
.5.5.1 response command frame format
Frame command response: <STX> □ □ □ <ETX> <BCC>
<
STX>: 0 2 (HEX), the command to start the frame
ETX>: 0 3 (HEX), orders the end of the frame
<
-
8 -