Instructions

2
3
)
)
Remove all loose cards from the unit.
When removing the jammed card, the card adjuster plate may need to be loosened. Do
not use excessive force. Do not pry the plastic parts with any tools.
If necessary, re-adjust for card thickness and load tower with cards.
4
)
5.4 card thickness adjustment
In order to meet different needs of the thickness, card thickness on the machine is
adjustable. Please follow the step to adjust the thickness:
The key is to adjust the space the between the upper and the lower wheels. The principle
is to ensure the space is 1.5 times thick of the card, and keep even.
Steps as following:
a) Loosen the tensioner
b) Wring the bolts on the top of the bracket out about 1-2mm
c) Loosen the four bolts on both right and left side of the bracket
d) Select the right card and insert into the upper and lower wheels
e) Adjust the two sides of the bracket on the top to keep the wheels appressed with the
card
f) Tight the four bolts on both side of the bracket
g) Wring the two bolts on the top of the bracket in
h) Take the card out of the wheels
i) Tight the tensioner
Thickness of the card changes, please re-adjust the machine.
How to select the thickness
Thickness of the card
2.2
108
1.5
1.2
1.0
0.8
0.6
Thickness of the plug guage
2.8~3 2.3~2 1.8~2 1.5~1 1.4~1 1.1~1 0.8~
.8 .2 .8 .6 .3 1.0
Minimum for used cards and maximum for new cards.
.
4
6. Safety and Maintenance
1
)
Control circuitry must be arranged to disconnect power to the mechanism when the host
-
11 -