Instructions

NFC & MIFARE & ISO14443AB & ISO15693 & ISO18000 & ISO7816 IC Card Module www.quio-rfid.de
Copyright © 2003-2022 Quick Ohm Küpper & Co. GmbH. All rights reserved. 87/101
5.14 NFC Functions
5.14.1 Set NFC Device Working Mode
Function: Set NFC device working mode.
Host sends:
Frame 0xC0 MODE Checksum
Success:
Frame 0xC0 Checksum
MODE: 1 byte
= 0x00 passive initiator (default)
= 0x01 passive target
= 0x02 active initiator
= 0x03 active target
= 0x04 NFC Tag simulation
Failure:
Frame 0x3F Checksum
Example:
Send: 0x00 05 00 C0 01 C4
Return: 0x00 04 01 C0 C5
5.14.2 Initiator Commands
5.14.2.1 Initiator Request Targets
Function: initiator request target attributes over RF interface.
Host sends:
Frame 0xC1 Checksum
Success:
Frame 0xC1 DATA Checksum
DATA: returned message from target
Failure:
Frame 0x3E Checksum
Example:
Send: 0x00 04 00 C1 C5
Return: 0x00 20 01 C1 31 32 33 34 35 31 32 33 34 35 00 00 00 0C 32 46 66 6D 01 01 11 03
02 00 13 04 01 96 03
5.14.2.2 Data Exchange
Function: initiator exchange data with target over RF interface.
Host sends:
Frame 0xC2 DTS Checksum
DTS: Data to exchange