Instructions

NFC & MIFARE & ISO14443AB & ISO15693 & ISO18000 & ISO7816 IC Card Module www.quio-rfid.de
Copyright © 2003-2022 Quick Ohm Küpper & Co. GmbH. All rights reserved. 81/101
5.12.3 ISO15693 Stay Quiet
Function: Set the CURRENT TAG stay quiet. This command is only for "Inventory" and
"get system information". Read and write card commands are based on the address, so even with
this command; it could also read and write operations.
Host sends:
Frame 0x5D Checksum
Success:
Frame 0x5D Checksum
Failure:
Frame 0xA2 Checksum
Example:
Send: 0x00 04 00 5D 59
Return: 0x00 04 01 5D 58
5.12.4 ISO15693 Get System Information
Function: Get the system information of CURRENT TAG.
Host sends:
Frame 0x5E Checksum
Success:
Frame 0x5E Data Checksum
Data: system information, the content to depend on the functions of the card, please
refers to the data sheet of the card.
Failure:
Frame 0xA1 Checksum
Example:
Send: 0x00 04 00 5E 5A
Return: 0x00 12 01 5E 0F E3 DB CF 19 00 00 07 E0 33 23 3F 03 8B EC
5.12.5 ISO15693 Reset to Ready
Function: Set a stay quiet TAG reset to ready.
Host sends:
Frame 0x5F UID Checksum
Data: 8 bytes, UID of the tag to reset to ready.
Success:
Frame 0x5F Checksum
Failure:
Frame 0xA0 Checksum
Example:
Send: 0x00 0C 00 5F E3 DB CF 19 00 00 07 E0 5A