Instructions

NFC & MIFARE & ISO14443AB & ISO15693 & ISO18000 & ISO7816 IC Card Module www.quio-rfid.de
Copyright © 2003-2022 Quick Ohm Küpper & Co. GmbH. All rights reserved. 73/101
Frame 0x67 Checksum
Failure:
Frame 0x98 Checksum
Example:
Send: 0x00 04 00 67 63
Return: 0x00 04 01 67 62
5.9.4 SR176 Card Read
Function: Read data block of SR176 card.
Host sends:
Frame 0x68 StartBlock BlockNumbers Checksum
StartBlock: 1 byte.
BlockNumbers: 1 byte; the quantity of blocks to be read.
Success:
Frame 0x68 Data Checksum
Data: 2 bytes * BlockNumbers, data from the card.
Failure:
Frame 0x97 Checksum
Example:
Send: 0x00 06 00 68 00 08 66
Return: 0x00 14 01 68 93 39 E9 0F 08 92 D0 02 EE EE EE EE EE EE EE EE 79
5.9.5 SR176 Card Write
Function: Write into the data block of SR176 card. After written, module will read the data
to compare. If it is not equal, it will return failure.
Host sends:
Frame 0x69 StartBlock BlockNumbers Data Checksum
StartBlock: 1 byte.
BlockNumbers: 1 byte; the quantity of blocks to be written.
Data: 2 bytes * BlockNumbers, data to write to the card.
Success:
Frame 0x69 Checksum
Failure:
Frame 0x96 Checksum
Example:
Send: 0x00 0A 00 69 08 02 88 88 99 99 69
Return: 0x00 04 01 69 6C