Instructions

NFC &

MIFARE & ISO14443AB & ISO15693 & ISO18000 & ISO7816 IC Card Module www.quio-rfid.de

5.9 SR176 Card Commands

5.9.1 SR Serial Cards 1 Slot Initiate Card

Function: SR serial cards (SR176/SRI512/SRI1K/SRI2K/SRI4K/SRIX4K, the same below)

single channel initiate card. Before read/write card, it needs to use the command of “SR serial

cards select” to select the card. For more detailed card operations please refer to the card manual

please.

Host sends:

Frame 0x63 Checksum

Success:

Frame 0x63 Card ID Checksum

Card ID: 1 byte. It is a random ID.

Failure:

Frame 0x9C Checksum

Example:

Send: 0x00 04 00 63 67

Return: 0x00 05 01 63 EE 89

5.9.2 SR Serial Cards Select

Function: Select a SR card as the CURRENT CARD.

Host sends:

Frame 0x65 Card ID Checksum

Card ID: 1 byte, the card ID to select.

Success:

Frame 0x65 Card ID Checksum

Card ID: 1 byte, the selected card ID

Failure:

Frame 0x9A Checksum

Example:

Send: 0x00 05 00 65 EE 8E

Return: 0x05 01 65 EE 8F

5.9.3 SR Serial Cards Completion

Function: Set the CURRENT CARD into the completion status. If want to operate the card

again, need to move the card out of the antenna RF effective field and initiate the card again.

Host sends:

Frame 0x67 Checksum

Success: