Instructions

NFC & MIFARE & ISO14443AB & ISO15693 & ISO18000 & ISO7816 IC Card Module www.quio-rfid.de
Copyright © 2003-2022 Quick Ohm Küpper & Co. GmbH. All rights reserved. 54/101
Example:
Send: 0x00 0A 00 3B 00 04 00 01 00 00 34
Return: 0x00 04 01 3B 3E
5.7.3.7 MIFARE Plus Purse Decrement
Function: Level 3 command, purse decrement of MIFARE Plus.
Host sends:
Frame 0x3C Block Value Checksum
Block: 2 bytes (MSB first), block number.
Value: 4 bytes (LSB first), value to decrease
Success:
Frame 0x3C Status Checksum
Status: status code returned from the card.
Please reference: MIFARE Plus Returned Status Code.
Failure:
Frame 0xC3 Checksum
Example:
Send: 0x00 0A 00 3C 00 04 00 01 00 00 33
Return: 0x00 04 01 3C 39
5.7.3.8 MIFARE Plus Purse Copy
Function: Level 3 command, copy the MIFARE Plus purse to another block in the same
sector.
Host sends:
Frame 0x3D Source Target Checksum
Source: 2 bytes (MSB first), source block number
Target: 2 bytes (MSB first), target block number
Success:
Frame 0x3D Status Checksum
Status: status code returned from the card.
Please reference: MIFARE Plus Returned Status Code.
Failure:
Frame 0xC2 Checksum
Example:
Send: 0x00 08 00 3D 00 04 00 05 34
Return: 0x00 04 01 3D 38
5.7.3.9 MIFARE Plus First Authenticate
Function: Level 1/3 Command. In Level 3, this command is use to authorize for data block,
configuration block and AES key block before reading and writing.
Host sends:
Frame 0x3E Address Key Checksum
Address: 2 bytes (MSB first), AES key address.
Key: 16 bytes, AES key
Success: