Instructions

NFC & MIFARE & ISO14443AB & ISO15693 & ISO18000 & ISO7816 IC Card Module www.quio-rfid.de
Copyright © 2003-2022 Quick Ohm Küpper & Co. GmbH. All rights reserved. 31/101
5.3 Module security
5.3.1 Get authentication code
Function: Get authentication code from module; this is the 1
st
step of module authentication.
Host sends:
Frame 0x07 Code Checksum
Code: 8 bytes, ciphered authentication code.
Success:
Frame 0x07 Checksum
Example:
Send: 0x00 04 00 07 03
Return: 0x00 0C 01 07 D0 9B 09 33 2C B7 9F FB 84
5.3.2 Module authentication
Function: This is the 2
nd
step of module authentication; after this step the controller could be
sure the module is the certified products.
NDA is needed for the authentication method. Contact us please.
Host sends:
Frame 0x08 AuthData Checksum
AuthData: 16 bytes, ciphered authentication data.
Success:
Frame 0x08 Result Checksum
Result: 8 bytes authentication result.
Failure:
Frame 0xF7 Checksum
Example:
Send: 0x00 14 00 08 83 68 42 DB 08 9B FD CD 92 25 31 1A EE 04 31 FC 76
Return: 0x00 0C 01 08 1F 7A 61 4D 9D 65 35 1D 9C
5.3.3 Modify authentication key
Function: Modify the authentication key of the module; authentication is needed for this
operation.
Host sends:
Frame 0x09 KeyData Checksum
KeyData: 32 bytes, ciphered key modificatiaon data.
Success:
Frame 0x09 Checksum
Failure: