Instructions

NFC &
MIFARE & ISO14443AB & ISO15693 & ISO18000 & ISO7816 IC Card Module www.quio-rfid.de
Copyright © 2003-2022 Quick Ohm Küpper & Co. GmbH. All rights reserved. 11/101
functions. This mode could support active mode too. It could work with other NFC devices which
support active mode. If the initiator only supports passive mode, passive mode is the only mode could
be chosen.
2.12 NFC Tag Simulation Functions
The reader module of supporting NFC target mode could be simulated as a NFC Tag. It is a
FLASH data storage space with 128 bytes. The memory space organization is according to Ultralight
card, 4 bytes as a page, total 32 pages.
The data in the NFC Tag could be initializing over communication port.
In order to WRITE to NFC Tag over RF interface, users MUST use the special command of Quio
Rfid reader module.