Instructions
NFC &
MIFARE & ISO14443AB & ISO15693 & ISO18000 & ISO7816 IC Card Module www.quio-rfid.de
Copyright © 2003-2022 Quick Ohm Küpper & Co. GmbH. All rights reserved. 10/101
2.6 EMV/PBOC Certification Mode
Some of the QM-ABCM7 modules have PBOC and EMV certification modes. These modes
support EMV& PBOC (LEVEL 1) protocol certification and electrical characteristics certification.
This mode could be open via sending the commands.
We are capability of designing the Reader which could pass the EMV/PBOC certification. If you
need the help, please feel free to contact us.
2.7 Operations Default Setting
QM-ABCM7 modules support the following default operations: setting automatically detecting
card ON/OFF; setting automatically output card SNR ON/OFF; setting automatically output card SNR
ONE TIME/CONTINUOUS; setting SNR output by HEX/ASCII; setting under automatically
detecting mode, ISO15693 card could be set AFI; setting automatically detecting card interval time;
setting multi-card operation ON/OFF; setting UART communication address and baud rate; setting I²C
communication address; setting RF output power. About the detailed above commands, please refer to
“Module reset to factory default".
2.8 ISP Function
QM-ABCM7 supports In System Program. The firmware of QM-ABCM7 could be updated via
USB or UART/RS232C interfaces.
2.9 Reader Authentication
Quio Rfid offers a method to authenticate reader module in order to ensure that our customer is
using Quio Rfid products. It is especially useful in some security sensitive environment.
NDA (None Distribute Agreement) is needed to obtain the detail operation steps. Please
contact us to sign the NDA.
2.10 Encryption Communication
Encryption communication is useful in data sensitive environment. Quio Rfid offers an encrypted
communication method to protect the sensitive data.
NDA (None Distribute Agreement) is needed to obtain the detail operation steps. Please
contact us to sign the NDA.
2.11 NFC Target Functions
Some PCD supports NFC functions, like PN512, and the reader module could support NFC target