Information

MIFARE & ISO14443A & ISO14443B IC Card Module www.quio-rfid.de

1 Product introduction

QM-ABCM7 is a modular circuit that reads and writes non-contact IC cards by sending

commands from users.

The RF antenna and module of QM-ABCM7 adopt an integrated design. The impedance analyzer

is used to adjust the RF circuit and the antenna to match the impedance, which can achieve very good

read and write performance and very good stability.

QM-ABCM7 has many functions, supports a variety of international standards for contactless IC

cards, and supports cards from many different suppliers. The designer has classified and integrated

the commands of the non-contact IC card, so the commands issued by the user to the module are

relatively simple, but it can complete the comprehensive operation of various non-contact IC cards.

QM-ABCM7 supports full-featured NFC, including card mode and peer-to-peer mode. Active

mode and passive mode in peer-to-peer mode are also supported.

2 Technical parameters

● PCD type: PN512

● Working frequency: 13.56MHz

● Supported standard: ISO14443A，ISO14443B，ISO18092

● Card supported: Refer to: module function configuration table

● Anti collision ability: Full function anti collision; be able to set multi-cards or single card

● Auto detecting card: Supported, default OFF, could be set

● Power supply: DC 5V（±0.5V）

● Interface: CCID or RS232C+USB HID（book, when ordering）

● Communication speed: RS232C 19200bps /9600bps/38400bps/57600bps/115200bps

USB USB 2.0 HID or CCID

● Max. command length: JCP04 253 bytes

JCP05 510 bytes

● Power consumption: 100mA

● Operating distance: 0-50mm（depending on card quality）

● Dimension: 43.5（W）*32（L）*8（H）mm

● Weight: About 10g

● ISP： Compliant

● Operating temperature: -25 ~ +85 ℃

● Storage temperature: -40 ~ +125 ℃

● RoHS： Compliant