Instructions

13.56 MHz Modbus-RTU RFID Reader QU-950-4-HF User Manual
Quick Ohm Küpper & Co. GmbH
QUIO ®
10
6.1.2 Parameter Register 2:40002
Register 40002（default value:0x0000）
bit
description
15～8
reserved
8~7
00->Both reading and writing ,Key A authentication(default)
01->Both reading and writing, Key B authentication
10->Reading card with Key A, writing with Key B
11->Reading card with Key B, writing with Key A
6
0-> Authenticate with Key Register 1 (40011~40013)
1-> Authenticate with Key Register 1 (40103~40105)
5
0->Green LED without action after getting card information.
1-> Green LED Turn ON after getting card information. (Only 1 Time)
4
0->Beep without action after getting card serial number.
1->Beep Turn ON after getting card serial number. (Only 1 Time)
3~0
The Card type of current operation：
0x00->S50/S70(Default)
6.1.3 Parameter Register 3:40100
Register Address 40100 (default value:0x0000）
bit
description
8～16
reserved
7
Card Serial No. Register value Empty automation.
0->Do not Empty value automation, you need fill zero value to the register
from 40004 to 40007.
1->Empty value after read register from 40004 to 40007, if bit5=1, then
the data block register will be empty too.