Instructions

13.56 MHz Modbus-RTU RFID Reader QU-950-4-HF User Manual

Quick Ohm Küpper & Co. GmbH

QUIO

2-8

Data Register:40016～40047

2-9

Reserved Register: 40048～40099

unused

6.1 Power-Off Save Register

All Power-Off Save Registers will save the data after power off, so these registers only

need be written once. You can write these config data by PC Demo and Config software.

6.1.1 Parameter Register 1:40001

Parameter Register 1 is used to configure the station number of the card

reader and the communication baud rate.

Address 40001（Default Value:0x0301）

bit

Description

15~8

Available Baud:

0x01->9600bps

0x02->14400bps

0x03->19200bps(default)

0x04->28800bps

0x05->38400bps

0x06->57600bps

0x07->115200bps

else->19200bps

7~0

Stattion ID: (default value:0x01)

ID from 0x01 to 0xFE