Product guide

P/N 480-0028-00-05 3-17
Chapter 3: Tenor Configuration Manager Wizard
Configure H323 VoIP Settings
If you selected H.323 for your routing, the next item to select is the H.323 routing method (see
Figure 3-13
).
Figure 3-13 H.323 VoIP Configuration
The H323 VoIP Configuration prompts you to choose between using a Gatekeeper or Static Routes.
• If you choose to use a Gatekeeper, you can configure an IP address for both a primary and
secondary Gatekeeper that will handle routing for the Tenor.
• If you choose to use Static Routes, you can configure up to 128 Static Routes, with 24 number
patterns each. Enter the following:
Static Route ID - Set a name for the Static Route.
H323 Endpoint IP Address - Enter the H323 Endpoint IP address where calls will be routed.
H323 Endpoint Type - Specify whether the Endpoint is a Gateway or Gatekeeper.
Static Route Number Patterns - Enter the number patterns that will be routed to the Endpoint IP
address, specify whether it is a public or private numbmer dial plan, and assign a routing
priority from 0-255 (typically 1 or 2).
When you are done making changes, click Next again. The task status shows Done.
Click Next to advance to the next window. The Configuration Summary is displayed
(see Figure 3-14
).