Product guide

P/N 480-0028-00-05 3-13
Chapter 3: Tenor Configuration Manager Wizard
Configure a Multi Path Application
The next item to configure is the Multi Path Configuration, for either Analog or Digital Tenors (see
Figure 3-9
).
Figure 3-9 Multi Path Configuration
You are prompted to enter the following information:
• Pass Through Calls - Sets whether or not this routing group will allow calls to "pass through"
to an opposite side routing group that has a matching passthrough ID.
• Bypass Number Pattern - Allows you to set one or more numbers that are automatically sent
to the PSTN; they will not be routed via VoIP.
When you have made your entry, click Save/OK, and then Done. The Bypass Number
Configuration table is displayed, allowing you to add, edit, or delete phone numbers.
When you are done making changes, click Next again. The Multi Path Configuration window shows
your task status as Done. Click Next to advance to the next window.