Product guide

P/N 480-0028-00-05 3-11
Chapter 3: Tenor Configuration Manager Wizard
Configure Analog Settings
Phone Port
If you are configuring an Analog Tenor, these settings allow you to configure the analog port on the
phone side (see Figure 3-7
).
Figure 3-7 Phone Port Configuration
You are prompted to enter the following information:
• Disconnect Generation - Allows you to set the Tenor to disconnect based on a tone, or battery
removal or reversal.
• Caller ID Generation - Allows you to configure how caller ID is generated.
• Phone Number - Allow you to specify the phone number(s) corresponding to the FXS ports.
• Channel - Allows you to associate a channel with the phone number.
When you are done making changes, click Next again. The Phone Port Configuration window
shows your task status as Done. Click Next to advance to the next window.