Product guide

P/N 480-0028-00-05 3-9
Chapter 3: Tenor Configuration Manager Wizard
Phone Number
If you are configuring a Digital Tenor, the next item to configure is the Phone Number (see Figure
3-6).
Figure 3-6 Phone Number Configuration
Set the following options:
• Phone Number/Extension - Enter a phone number or PBX extension to be associated with a
specific channel on your Tenor. You may specify an individual number for each channel, or one
number for all channels. If you select "All" to assign a single number for all channels, this will
create a hunt group so that when a call comes in and the first phone is busy, the second answers,
and so on. The format of the number will depend on whether the number is public or private.
- If you wish to assign extensions from a private PBX, enter as many digits as are used for that
installation (e.g., 7705).
- If you wish to assign a phone number to be accessed from the public network, enter the full
number in international E.164 format (e.g., 17324609000). The Country Code and Area Code
you entered previously in the Dial Plan Configuration are inserted here to help you start
building the number.