Product guide

P/N 480-0028-00-05 3-5
Chapter 3: Tenor Configuration Manager Wizard
Configure your Dial Plan
The next item to configure is the Dial Plan (see Figure 3-3).
Figure 3-3 Dial Plan Configuration
The Dial Plan dialogs require you to enter the following information:
• Dial Plan Country - Select the country (or set of dial plan rules) where the Tenor is located.
This automatically configures the Tenor with the international dial plan for the specified
country.
• Progress Tone Country - This allows you to set which country's signaling tones (ringback,
busy, etc.) will be used by the Tenor.
• Minimum Dial Digit Length - Set the minimum digit length for dialing.
• Maximum Dial Digit Length -Set the maximum digit length for dialing.
• Country Code - Set the code for the country where the Tenor is located.
• Area Code - Set the area or city code where the Tenor is located..
• Carrier Prefix Pattern - Set a pattern used to identify the carrier to be used in this location
• Long Distance Prefix - Set the prefix used to dial a long distance number from this location.
• International Prefix - Set the prefix used to dial an International number from this location.
When you have made your choices, click Next again. The Dial Plan Configuration window shows
your task status as Done. Click Next to advance to the next window.