Product guide

P/N 480-0028-00-05 3-4
Chapter 3: Tenor Configuration Manager Wizard
Configure your Network Connection
The first prompt is for how to configure the IP address of the Tenor, as shown in Figure 3-2.
Figure 3-2 Tenor IP Address Configuration
Choose from one of the following methods of setting an IP address for your Tenor. Your choice will
determine the next window displayed.
• Use DHCP - This selection attempts to obtain an IP address automatically. If you select to use
manually configured DNS servers, you should enter a primary DNS server IP address, and you
may also enter a secondary DNS server IP address.
• Specify a static IP - This option requires that you complete the Specify a static IP address
dialog. This requires you to enter an IP address and submet mask, and also allows you to enter
a default Gateway address for routing. You may also enter an external NAT (Network Address
Translation) IP address, if the Tenor is behind a firewall.
• Use PPPoE. This option requires that you complete the Specify your PPPoE user name and
password dialog. Enter the user name and password; and re-enter the password to confirm it.
When you have made your choices, click Next again. The IP Address Configuration window shows
your task status as Done. Click Next to advance to the next window.