Product guide

P/N 480-0028-00-05 3-2
Chapter 3: Tenor Configuration Manager Wizard
Launching the Configuration Wizard
The Auto Discovery process is described in Chapter 2. From the Configuration Manager’s main
menu, click on the Discover icon, which appears as a magnifying glass. After a scan of the local
network, the Tenors Discovered screen is displayed, listing all local Tenors on the network that need
to be configured.
After running the Auto Discovery process, select the desired Tenor from the Tenors Discovered list
and click Connect.The Wizard Software Loader screen displays the latest software installed on your
unit, and prompts you to upgrade if there is a later version available. If this is an initial install, it is
likely that you already have the latest software, and you will not need to run this process at this time.
If you have connected to an unconfigured Analog or Digital Tenor, the Configuration Wizard
launches and displays its splash screen (see Figure 3-1
).
Figure 3-1 Configuration Wizard
To begin configuration, click Next to move to the next screen. You are then walked through a series
of windows to configure your Tenor.