Product guide

P/N 480-0028-00-05 2-20
Chapter 2: Getting Started - Tenor Configuration Manager
Launch Telnet Command Line Interface (CLI) Session
From the Configuration Manager, you can launch the Command Line Interface (CLI). The CLI
provides another method for configuring the Tenor unit.
Launch a CLI session as follows:
1. From the main menu, select Action > Telnet > Launch CLI. The CLI is launched.
2. Enter a user name and password. The default user name is admin; the default password is
admin. The main CLI prompt is displayed.
3. For more information about the CLI, and definitions for fields, see the Command Line Interface
(CLI) Reference Guide on the CD ROM you received with the system.
Set Telnet Client
You can specify the program that is launched to connect to the CLI.
1. From the main menu, select Action > Telnet > Set Telnet Client.
2. In the Set Telnet Client Program window, in the Telnet Client Program field, enter the executable
name. You can also browse to its location by clicking the button to the right of the field.
3. In the Vendor field, you may optionally enter the name of the vendor that supplied the Telnet
client software.
4. Click OK.
Tenor Telnet Sessions
You can launch a dialog that tells you about current Telnet sessions.
1. From the main menu, select Action > Telnet > Tenor Telnet Sessions. The Manage Telnet
Sessions dialog is displayed.
2. For all current Telnet sessions, you will see the following information.
Session - a sequential index number for this Telnet session.
Client IP Address - the IP address to which the Telnet session is connected.
Session Connect Time - the total time of the Telnet connection.
3. Click OK.