Product guide

P/N 480-0028-00-05 2-17
Chapter 2: Getting Started - Tenor Configuration Manager
View Tenor Status/Info
From any point in the software, you can view status information from the device to which you are
currently connected. You can also launch three status-related utilities.
From the main menu, select View > Tenor Status/Info. You are presented with the following options.
Table 2-1 Tenor Status/Info Menu Options
Option Description
Active Calls Launches your default text editor (such as Notepad) populated with a
report covering the following parameters: Call ID, Calling Number, Called
Number, Call Duration, Call Type, Resource ID Incoming, Media GW IP
Outgoing, Remote Signal Gateway, Codec Type, Incoming Trunk Group,
Outgoing Trunk Group.
Gatekeeper Active Calls Launches a text report that specifies the number of VoIP Calls and VoIP
WAN Calls the Gatekeeper currently has up.
Gatekeeper Table Launches a text report that provides a Public DirectoryNumber Tree and a
Private DirectoryNumber Tree for both Zone DirectoryNumbers and
Network DirectoryNumbers.
Gatekeeper Statistics Launches a text report that provides the following Gatekeeper Statistics:
Number of DN's in routing database, Number of network routes, Number of
endpoints, Number of active calls, and Number of inter-zone calls.
Trace Telephone Route/
Trace GK Route
When you enter a telephone number in the dialog box and click OK, the
application does a search and then launches a text report providing you
with Public and Private Endpoint candidates and Public and Private Proxy
candidates.
IP Route Table Launches a text report that provides you with both a Route Net table and a
Route Host table that list Destination IP, Gateway IP, Flags, Refcnt, Use,
and Interface.
IP Route Statistics Launches a text report that lists occurrences for bad routing redirect,
dynamically created route, new gateway due to redirects, destination found
unreachable, and use of a wildcard route.
Trace IP Route When you enter an IP address in the dialog box and click OK, the system
launches a text report that tells you how a route was found to the address,
including number of hops and other IP addresses along the route.
Ping When you select this option, a dialog box appears for you to specify
Destination IP Address, Number of Pings to Send, Packet Size to Send (in
bytes), and Wait Time Before the First Ping (in ms). When you click OK, the
test is performed and a text report of the results is launched.
TCP Statistics Launches a text report on packets sent and received, highlighting TCP
statistics.
UDP Statistics Launches a text report on packets sent and received, highlighting UDP
statistics