Product guide

P/N 480-0028-00-05 2-12
Chapter 2: Getting Started - Tenor Configuration Manager
Configure a Tenor
NOTE: This section assumes you are connected to the Tenor at the IP address you specified. Also,
the Tenor must be running the Configuration Manager software.
You can configure each window and submit changes to the database. Once you submit the changes
to the database, the configuration options are saved until you perform another submit or restore the
default values.
Window- and field-specific information is available from the main Help window (click on the ?
from the main tool bar window; for other Help options, see Chapter 1: Introduction
). Help includes
window/field definitions, along with default and valid entries, as well as any special instructions for
using the windows/fields.
Follow these steps:
1. Click on the desired menu option. The corresponding window is displayed. See Figure 2-5
.
Figure 2-5 Sample Screen
2. Configure the desired fields. To gain information about a specific field, click the Help button (at
the bottom of the applicable window) and click the question mark pointer over the field for
which you require information. Your Internet browser is launched and displays the field
definition for that field. See Figure 2-6
.
Click on
Configure
Options
Time Server