Product guide

P/N 480-0028-00-05 2-3
Chapter 2: Getting Started - Tenor Configuration Manager
Login
After installing the Configuration Manager, you are ready to log in to a Tenor.
NOTE: You can only connect to one Tenor unit at a time. To log in to a different unit, you must
connect by specifying the applicable IP address.
1. Start the Configuration Manager, from the location on your PC that you specified during
installation. For example, click on Start > Programs > Quintum Tenor Configuration Manager >
Tenor Config Manager. The Configuration Manager is launched, and the Address Book window
is displayed. If this is a first session, the Auto Discovery process launches to try to find any
Tenors connected to your local network. See Auto Discovery
for a description of this process.
2. To add a new address, click Add. In the Tenor IP Address box, enter the IP address of the Tenor.
(If you have connected before, and the IP address is listed from a previous login, select that IP
address and click Connect.)
3. Enter the Tenor Server Port (must match the port number set through the CLI; the default entry is
8080).
4. Enter a Description text string to help you manage the Tenor.
5. Enter a Login user name. The default user name is admin; select a different name if you have
changed it in the CLI.
6. Enter a Password name. The default password is admin; select a different name if you have
changed it in the CLI. You must also re-enter the password in the Confirm Password field. You
can also click the Remember Password box if you want Configuration Manager to automatically
fill in the password next time you log in.
7. Click OK. Your entry is now listed in the Address Book.
8. Click Connect. Configuration Manager attempts to connect to the Tenor that you entered.
9. To connect to a different IP address after the initial login, see the next section, Log in to a
different Tenor.
Log in to a different Tenor
When you log on initially, you specify an IP address of a Tenor to configure. At any time, you can
connect to a different Tenor. You can connect to a different IP as follows:
1. From the main menu bar, click on File > Connect or File > Address Book. Click the Add button
to display the Add Address window.
2. Follow the directions in the previous section to fill in the information requested in this window.
3. Click OK. Your new connection is added to the Address Book.
4. Click Connect. The Tenor Configuration Manager connects to the remote Tenor and the main
window is displayed. You are now ready to configure the Tenor.