Product guide

P/N 480-0028-00-05 2-2
Chapter 2: Getting Started - Tenor Configuration Manager
System Requirements
The following are required to install the Tenor Configuration Manager on your PC:
• Pentium III 800MHz processor
• 256 MB Memory
• 128 MB free hard disk
• Internet connection
• Microsoft® Windows 2000 or Microsoft® Windows XP
• Netscape Communicator 6.0 or later OR Internet Explorer 5.0 or later
NOTE: Some problems have been noted when the system is using an ATI Rage 128 Pro video card
with an outdated driver. Go to http://www.ati.com
and verify that you have the latest
driver.
Installation
Install the software on your PC as follows:
NOTE: At any time during the installation process, you can click Cancel to cancel the installation.
If you need to uninstall the software, follow the procedures for Add/Remove Programs in
Microsoft® Windows.
1. The Configuration Manager application may be installed either from disk or over the Internet.
From the main page of the User CD shipped with the Tenor, click on Tenor Tools and then Tenor
Configuration Manager (GUI). Skip to step 5.
2. To download the Tenor Configuration Manager zip file from the Quintum website, browse to:
http://www.quintum.com/support/mgmt/index.shtml
.
3. Select the installation file and unzip and extract the zip file into a local directory of your choice.
4. Click on "install.exe" to launch the Tenor Configuration Manager install application.
5. The Quintum Tenor Configuration Manager splash screen is displayed. Click Start Installer for
Windows. The installation process begins. To cancel the installation process at any time, click
Cancel.
6. Choose a directory in which to install the software (the default is C:\Program Files\Quintum\
Tenor Configuration Manger). Once installation is complete, the Customer Code Dialog screen
is displayed. The generic, default code is 0000, but a company-specific code may be available.
See your system administrator for more information. (If required later, you can change the
customer code from the same directory in which you installed the software, i.e., Start >
Programs > Quintum > Tenor Configuration Manager > Get CustomerCode. Enter the
appropriate code and click OK.)
7. If you are installing an Analog Tenor for the first time, the Configuration Wizard (described later
in this chapter) will launch to help you set up the application. You are prompted through the rest
of the installation process.
8. When installation is complete, click Done.