Product guide

P/N 480-0062-00-10 2-5
Chapter 2: Hardware Components
• Console port. This RS-232 connector is used for connection to a PC’s serial port via DB-9
serial cable at 38400 BPS 8N1, without flow control. The input/output signals are listed in
Table 2-3.
Figure 2-3 DB-9 Female Connector Pin Order
Table 2-3 Serial RS232 DB-9 Connector Pinouts
• Diag. Enables you to perform software diagnostic procedures.
• Reset. Enables you to reset the system. See
Chapter 5: Advanced Topic: Diagnostics/Maintenance
for more information.
• Power Switch. Switch to turn power on and off.
• Power Receptacle. Connection port for connection to an AC outlet for power.
8 RSVD Reserved Brown
Pin # Function Description
1 DTR Data Terminal Ready
2 TXD Transmit Data
3 RXD Receive Data
4 CD Carrier Detect
5 GND Signal Ground
6 N.C. No Connect
7 N.C. No Connect
8 N.C. No Connect
9 N.C. No Connect
Pin # Signal Definition Color
5 4 3 2 1
9 8 7 6