Product guide

3-2 P/N 480-0059-00-00
Chapter 3: Installation/Basic Troubleshooting
Installation
Before you begin the actual installation, review the pre-installation guidelines which follow and
inspect the package contents.
Pre-Installation Guidelines
• Always use an anti-static wrist strap when handling the unit.
• Do not open the unit cover. Inside parts have hazardous voltages and are extremely sensitive to
static. If the unit has been opened, your warranty is void.
• Do not connect equipment in wet conditions and keep away from dusty areas.
• The area must not exceed the temperature and humidity guidelines outlined in Chapter 2:
Hardware Components.
• Avoid exposing the unit to excessive vibrations.
• Ensure no equipment is put on top of the chassis.
Inspect Package Contents
Before you install the hardware, ensure the following components are included in your shipment:
• Tenor AS
• 1 AC Power adaptor/cord
• 1 DB-9 RS-232 Serial Cable
• RJ-45 Cable
• Product Guide in CD format
If a listed component is not included in your package, contact your customer service representative.