Product Manual

TM 55/65 Treadmill 4.0 70-00297-01 A
B-5
Installation
4. Plug the cable for the optional Emergency Stop Button, if present, into the connector
on the front of the hood (see Figure B-1).
Note: If the optional Emergency Stop Button is present, it must remain connected and
secured at all times. It should be disconnected only by an authorized technician.
5.
(High Voltage units only) Plug the female end of the power cord into the connector
on the front of the treadmill hood. Be sure the plug is connected securely, then tighten
the clamp using the hex wrench provided.
6. If you want to attach the Q-Stress preamp to the handrail, follow the installation
instructions included with the preamp.