Product Manual

70-00297-01 A TM 55/65 Treadmill 4.0

B-4

Installation

If you choose to install your treadmill without the assistance of your representative, follow

the procedure given below:

Tools

Hex wrench (supplied in kit)

Procedure

To install the treadmill:

1. Ensure that the handrail gaskets have been placed in their proper location (see

Figure B-1).

2. Insert the front handrail into the holes on each side of the hood.

3. Use the two hex-head socket screws recessed within the front of the hood to secure the

handrail:

a. Using the hex wrench supplied in the ship kit, turn the socket screws clockwise.

b. Cover the screws with the caps supplied in the ship kit.

Figure B-1: Example of Treadmill front

1 Handle bar gasket

2Socket screw

3Cap in place

4 Emergency Stop switch Connector (optional)